Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
QSFP-40G-ZR4 is compatible with 40GBASE-ZR4 QSFP+ 1310nm 80km optical transceiver module
¥0.00
跳至产品信息
QSFP-40G-ZR4 is compatible with 40GBASE-ZR4 QSFP+ 1310nm 80km optical transceiver module
¥0.00
Product Overview
QSFP-40G-ZR4 is compatible with 40GBASE-ZR4 QSFP+ optical transceiver module (1294~1310nm, single-mode fiber, 80KM, LC, DDM)
This universal QSFP-40G-ZR4 compatible QSFP+ optical transceiver is equipped with an LC duplex connector and supports a link transmission distance of up to 80 kilometers under the OS2 protocol. The 40GBASE-ZR4 QSFP+ transceiver module produced by AndXe complies with the QSFP+ MSA and IEEE 802.3ba 40GBASE-ZR4 standards. Additionally, this 40G fiber optic transceiver supports DDM (Digital Diagnostic Monitoring) function, enabling real-time monitoring of operational parameters. This 40G QSFP+ transceiver is suitable for various application scenarios such as long-haul networks, campus networks, and metropolitan area networks.
|
Part Number: |
QSFP-40G-ZR4 |
Vendor Name: |
AndXe |
|
Form Factor: |
QSFP+ |
Data Rate: |
40Gbps |
|
Wavelength: |
1294~1310nm |
Distance: |
80km@OS2> |
|
Connector: |
Duplex LC |
Cable Type: |
OS2 SMF |
|
Transmitter: |
EML |
Receiver Type: |
APD |
|
TX Power: |
-2.7~4.5dBm |
Receiver Sensitivity: |
<-28dBm |
|
Power Consumption: |
≤ 5W |
Modulation Format: |
NRZ |
|
DDM: |
Support |
Bit Error Ratio (BER): |
1.00E-12 |
|
Protocols: |
IEEE 802.3ba IEEE 802.3ba, QSFP+ MSA, SFF-8436, Infiniband 40G QDR |
Warranty: |
3 Years |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.