Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
Compatible with 200G Ethernet QSFP56 active optical cable (AOC)
¥0.00
跳至产品信息
Compatible with 200G Ethernet QSFP56 active optical cable (AOC)
¥0.00
Product description: Compatible with 200G QSFP56 AOC (1 meter, active, 0-70°C, QSFP56 to QSFP56).
The compatible 200G QSFP56 AOC enables connections between system units via 200Gb/s QSFP56 connectors. A typical application scenario is connecting two switches or servers. 200G active fiber is a high-speed, economical, and energy-efficient alternative to 200Gb/s fiber.
The QSFP56 uses NRZ modulation, achieving a maximum data rate of 25.78 Gbps per channel. It fully complies with IEEE 802.3bs, CMIS 4.0, IBTAIB HDR, and QSFP56 MSA.
Product parameters:
Maximum power consumption 4W
Minimum bending radius of flexible cabling 30mm
Simplifies operation; Provides an affordable short-distance connection
Complies with QSFP-DD MSA V5.0 and CMIS V4.0 standards
Meets Class 1 FDA laser safety standards
Our strengths
lie in our advanced technology, extensive experience
independent R&D and meticulous manufacturing, customizable
solutions with imported chips, stable performance
comprehensive compatibility, and expert personnel to solve technical problems
Our DDM digital diagnostic real-time monitoring module has undergone
specialized testing and verification, achieving satisfactory performance across all specifications
Product Parameters
| Part Number | AN-QSFP56-AOC-1M | Supplier Name | AndXe |
| Connector type | QSFP56 to QSFP56 | Maximum data rate | 200Gbps |
| Cable length | 1 meter (3 feet) | Cable type | OM3 |
| wavelength | 850 nanometers | Minimum bending radius | 30 mm |
| Transmitter type | VSCEL | Receiver type | password |
| Maximum power consumption | 4.5 watts per end | Jacket material | LSZH |
| CDR (Clock and Data Recovery) | TX and RX have built-in CDRs | Modulation format | PAM4 |
| Commercial temperature range | 0 to 70°C (32 to 158°F) | DDM/DOM | support |
| protocol |
IEEE 802.3bs, CMIS 4.0, IBTAIB HDR and QSFP56 MSA |
Warranty | 3 years |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.