Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
Universally compatible 200G QSFP-DD 8-to-8-25G SFP28 25G active optical splitter cable
¥0.00
跳至产品信息
Universally compatible 200G QSFP-DD 8-to-8-25G SFP28 25G active optical splitter cable
¥0.00
Product Description: Compatible with 200G QSFP-DD 8x 25G to 8 x 25G SFP28 25G split active optical fiber (1 meter, active, 0-70°C, QSFP-DD to SFP28).
The AN-QDD-8S28-AOC-1M is a 200G QSFP-DD 8x 25G to 8 x 25G SFP28 25G split active optical cable (AOC) compliant with IEEE standards, QSFP56 MSA, and SFP56 MSA. It features built-in DDM functionality at both ends for real-time monitoring. Designed for high-speed interconnects, it is widely used in data storage and communications industries, supporting switches, routers, HBAs, enterprise networks, registered networks, and data center networks.
Each cable undergoes rigorous testing, including power and wavelength testing, flow rate testing, optical performance testing, and end-face inspection, to ensure stable performance and reliable quality in high-intensity network environments.
Product Specifications:
Built-in Semtech chip
Maximum power consumption 5.5W (QSFP56), 3W (SFP56)
4x50G PAM4 VCSEL/PIN photodetector
Flexible cabling with a minimum bending radius of 30mm
Simplifies operation and provides an affordable 70m short-distance connection
Complies with QSFP56 MSA/SFP56 MSA and IEEE standards
Our strengths
lie in our advanced technology, extensive experience
independent R&D and meticulous manufacturing, customizable
solutions with imported chips, stable performance
comprehensive compatibility, and expert personnel to solve technical problems
Our DDM digital diagnostic real-time monitoring module has undergone
specialized testing and verification, achieving satisfactory performance across all specifications
Product Parameters
| Part Number | AN-QDD-8S28-AOC-1M | brand | AndXe |
| Interface type | QSFP56 to SFP56 | Maximum transmission rate | 200G |
| Minimum bending radius | 30mm | Cable length | 1m (3ft) |
| Receiver type | PIN | transmitter type | VSCEL |
| temperature | 0-70℃ (32-158°F) | Outer sheath material | OFNP |
| Typical power consumption | 5.5W (QSFP56), 3W (SFP56) | Voltage | 3.3V |
| wavelength | 850nm | Fiber type | OM3 multimode fiber (multimode) |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.