Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
200G QSFP56 to 4 x 50G SFP56 Ethernet Passive Dual-Axis Direct Connect Copper Wire (DAC) Tap
¥0.00
跳至产品信息
200G QSFP56 to 4 x 50G SFP56 Ethernet Passive Dual-Axis Direct Connect Copper Wire (DAC) Tap
¥0.00
Product Description:Universally compatible 200G QSFP56 to 4 x 50G SFP56 Ethernet passive disconnect DAC (1 meter, passive, 30AWG, 0-70°C).
The universally compatible 200G QSFP56 to 4x 50G SFP56 Ethernet DAC is a passive copper splitter cable that provides reliable high-speed connectivity. It conforms to SFP-8636, SFF-8472, SFF-8661, SFF-8432, IEEE 802.3bs-200GAUI-4, and IEEE 802.3cd-50GAUI-1 specifications. This 200G split passive DAC connects a 200G QSFP56 port at one end to four 50G SFP56 ports at the other, making it ideal for cost-effective short-range interconnects in carrier facilities, data center equipment rooms, and similar environments.
Product parameters:
Maximum power consumption 0.5W
tested in target switches, guaranteeing its superior performance, quality, and reliability
Minimum bending radius of flexible cabling 10mm
Simplifies operation, providing an affordable short-distance connection
Complies with hot-swappable QSFP28 MSA standard
Low insertion loss and ultra-low crosstalk improve performance.
Our strengths
lie in our advanced technology, extensive experience
independent R&D and meticulous manufacturing, customizable
solutions with imported chips, stable performance
comprehensive compatibility, and expert personnel to solve technical problems
Our DDM digital diagnostic real-time monitoring module has undergone
specialized testing and verification, achieving satisfactory performance across all specifications
Product Parameters
| Product Model | AN-Q56-4S56-DAC-P1M | brand | AndXe |
| connector type | QSFP-DD to 4xQSFP28 | Maximum transmission rate | 200G |
| Minimum bending radius | 10mm | Line gauge | 30 AWG |
| Cable length | 3m (10ft) | Outer sheath material | PVC |
| Operating temperature | 0 to 70°C (32 to 158°F) | Storage temperature | -40°C to 85°C (-40°F to 185°F) |
| Modulation method | NRZ | Support Protocol | QSFP-DD MSA Rev.5.0, CMIS Rev 4.0, IEEE 802.3cd |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.