Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
400G OSFP VSR4 50m MPO PAM4 850nm 50m DOM MPO-12/APC optical module
¥0.00
跳至产品信息
400G OSFP VSR4 50m MPO PAM4 850nm 50m DOM MPO-12/APC optical module
¥0.00
Product Overview
OSFP-400G-VSR4 optical module (multimode, 850nm, 50m, MPO-12/APC, DOM)
The OSFP-400G-VSR4 compatible OSFP optical module is designed specifically for 400GBASE Ethernet. It can transmit over OM4 multimode fiber (MMF) up to a distance of 50 meters with a wavelength of 850nm through an MTP/MPO-12 APC connector. This module complies with CMIS 5.2, IEEE 802.3bs, IEEE 802.3db, and OSFP MSA standards. It features built-in Digital Diagnostic Monitoring (DDM) for real-time access to operating parameters.
The single-port OSFP optical module with heat dissipation fins is specifically designed for Ethernet air-cooled switches, featuring low latency, low power consumption, and high reliability. It supports upstream connections in the spine-and-leaf architecture, such as from an 800G switch to a 400G switch, and also supports downstream connections from top-of-rack switches to Ethernet network cards. It is an ideal choice for high-performance computing, artificial intelligence, and cloud data centers.
Product features
Equipped with a Maxlinear DSP chip, it boasts a maximum power consumption of 9W
Real-device testing to ensure superior performance, quality, and reliability
The high-speed electrical interface complies with the IEEE 802.3bs standard
Hot-swappable OSFP, compliant with MSA standards
8x50G PAM4 re-timing 400G AUI-8 electrical interface
Equipped with digital monitoring capabilities, it provides powerful diagnostic abilities
Class 1 laser safety
Specifications
|
|
OSFP-400G-VSR4 | brand | AndXe |
| packaging format | OSFP (with heat sink)) | maximum transmission rate of | 400Gbps |
| wavelength | 850nm | The maximum transmission distance | 30m@OM3/50m@OM4 or OM5 |
| interface | MPO-12/APC | cable type | 多模 |
| transmitter type | VCSEL | receiver type | PIN |
| transmit power of | -4.6-4dBm | minimum receive power of | -6.4dBm |
| power budget of | 1.8dB | receive overload of | 4dBm |
| maximum power consumption of | 9W | extinction ratio of | 2.5dB |
| DDM/DOM | support | supports commercial temperature range | 0 to 70℃ (32 to 158℉) |
| modulation method (electrical port) | 8x50G-PAM4 | modulation method (optical port) | 4x100G-PAM4 |
| CDR (clock data recovery) | TX&RX built-in CDR | built-inFEC | not |
| Bit Error Rate (BER) | <2.4E-4 | mean time between failures | 684931 hours (@50°C, 60%CL) 273972 hours (@50°C, 90% CL) |
| packaging technology | COB (Chip Level Packaging) | application | 400G Ethernet |
| Support agreement | CMIS5.2,IEEE 802.3bs-400GAUI-8,OSFP MSA,IEEE 802.3 db-400GBASE-VR4 |
warranty | 3 years |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.