Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
400G OSFP FR4 2km MPO PAM4 1310nm 2km DOM Duplex LC/UPC Optical Module
¥0.00
跳至产品信息
400G OSFP FR4 2km MPO PAM4 1310nm 2km DOM Duplex LC/UPC Optical Module
¥0.00
Product Overview
OSFP-FR4-400G optical module (single-mode fiber, 1310nm, 2km, LC, DOM, with heat dissipation fins)
The OSFP-FR4-400G OSFP optical module utilizes a duplex LC interface and supports transmission distances of up to 2km over parallel single-mode fiber. The 400G Ethernet signal is transmitted through four parallel 1310nm optical channels, with one wavelength per channel. It can interwork with other IEEE-compliant 400GBASE-LR4 interfaces. This module adheres to the OSFP MSA, IEEE 802.3bs, and IEEE 802.3cu standards.
The single-port OSFP optical module with heat dissipation fins is specifically designed for Ethernet air-cooled switches, offering low latency, low power consumption, and high reliability. It supports upstream connections in a spine-leaf architecture, such as from an 800G switch to a 400G switch. It is an ideal choice for HPC computing, AI, and cloud data centers.
Product features
Equipped with Marvell DSP chip, with a maximum power consumption of 10W
Utilizing Sumitomo LD chips, it boasts high-end performance and exceptional reliability
Real-machine testing to ensure superior performance, quality, and reliability
High-speed electrical interface, compliant with IEEE 802.3bs standard
Hot-swappable OSFP, compliant with MSA standards
8x50G PAM4 retiming 400G AUI-8 electrical interface
Equipped with digital monitoring capabilities, it provides powerful diagnostic abilities
Class 1 laser safety
Specifications
| Compatible Model Name | OSFP-400G-FR4 | Brand | AndXe |
| Packaging Form | Single-port OSFP with heat sinks | Maximum Transmission Rate | 400Gbps |
| Wavelengths | 1271nm,1291nm,1311nm,1331nm | Maximum Transmission Distance | 2km |
| Interface | Duplex LC/UPC | Cable Type | Single-mode |
| Transmitter Type | CWDM EML | Receiver Type | PIN |
| Transmit Power | -3.2-4.4dBm | Minimum Receive Power | -7.2dBm |
| Power Budget | 4dB | Receive Overload | 4.4dBm |
| Maximum Power Consumption | 10W | Extinction Ratio | 3.5dB |
| DDM/DOM (Digital Diagnostics) | Supports | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Method (Electrical Port) | 8x50G-PAM4 | Modulation Method (Optical Port) | 4x100G-PAM4 |
| CDR (Clock Data Recovery) | TX & RX Integrated DSP | Integrated FEC | Supports |
| Modulation Methods | PAM4 | Packaging Technology | COB |
| Supported Protocols | OSFP MSA 5.1,CMIS 4.0,IEEE 802.3cu,IEEE 802.3bs | Warranty | 3 Years |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.