Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
25G SFP28 ZR 1310nm 80km LC single-mode optical module
¥0.00
跳至产品信息
25G SFP28 ZR 1310nm 80km LC single-mode optical module
¥0.00
Product Overview
SFP-25G-ZR is compatible with 25GBASE-ZR SFP28 optical transceiver module (single-mode fiber, 1310nm, 80km, LC, DDM)
This 25G SFP28 transceiver module, compatible with Cisco SFP-25G-ZR, is equipped with an LC duplex connector and can achieve link transmission up to a maximum distance of 80 kilometers over OS2 single-mode fiber (SMF). This 25G optical transceiver utilizes an SFP28 connector and supports a bandwidth of 25 Gbps. Furthermore, this 25G fiber optic transceiver also supports DOM/DDM (Digital Diagnostic Monitoring) functions, enabling real-time monitoring of operational parameters.
The 25GBASE-ZR SFP28 module produced by AndXe complies with the SFP28 MSA and IEEE 802.3cc SFP28 specifications. Furthermore, this small form-factor pluggable 28-channel (SFP28) LR optical module has been tested on host devices, ensuring full compatibility with Cisco devices such as data center switches, enterprise routers, and server network interface cards (NICs). This third-party 25G SFP module is affordable and serves as an ideal replacement for the Cisco SFP-25G-ZR SFP28 25G transceiver, providing a cost-effective and compatible solution for high-performance 25G connectivity.
| Model Name | SFP-25G-ZR | Supplier Name | AndXe |
| Form factor | SFP28 | Data rate | 25 Gbps |
| Wavelength | 1310 nanometers | Distance | 80 kilometers @ 0S2 |
| Connector | LC Dual-Link | Cable Type | OS2 SMF |
| Emitter type | EML | Receiver type | SOA&PIN |
| Transmitting power | 2~7dBm | Receiver sensitivity | <-28dBm |
| Power consumption | Less than 2.5 watts | Modulation format | NRZ |
| Dynamic | Support | Bit Error Rate (BER) | 1E-12 |
| Protocol |
IEEE 802.3cc、SFF- 8472、SFP28 MSA |
Warranty Card | 5 years |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.