Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
SFP-25G-LR-BIDI is compatible with 25GBASE-BX10-D SFP28 1330nm-TX/1270nm-RX 10km optical transceiver module
¥0.00
跳至产品信息
SFP-25G-LR-BIDI is compatible with 25GBASE-BX10-D SFP28 1330nm-TX/1270nm-RX 10km optical transceiver module
¥0.00
Product Overview
SFP-25G-LR-BIDI is compatible with 25GBASE-BX10-D SFP28 optical transceiver module (single-mode fiber, 1330nm-TX/1270nm-RX, 10km, LC, DDM)
This 25G SFP28 optical transceiver, compatible with the universal SFP-25G-LR-BIDI standard, is equipped with an LC simplex connector and supports the G.652 protocol, achieving a transmission distance of up to 10 kilometers. The 25G bidirectional module doubles the network capacity and conserves optical cable resources, as only one cable is required for bidirectional information transmission. The 25GBASE-BX SFP28 transceiver module produced by AndXe complies with the SFP28 MSA, CPRI, and eCPRI standards. Furthermore, this 25G fiber optic transceiver supports the DDM (Digital Diagnostic Monitoring) function, enabling real-time monitoring of operational parameters.
| Model Name: | SFP-25GBX-D | Vendor Name: | AndXe |
| Form Factor: | SFP28 | Data Rate: | 25Gbps |
| Wavelength: | 1330nm-TX/1270nm-RX | Distance: | 10km@OS2> |
| Connector: | LC Simplex | Cable Type: | OS2 SMF |
| Transmitter Type: | DFB BiDi | Receiver Type: | PIN |
| TX Power: | -5~2dBm | Receiver Sensitivity: | <-18dBm |
| Power Consumption: | <1.2W | Modulation Format: | NRZ |
| DDM: | Support | Bit Error Ratio (BER): | 1.00E-12 |
| Protocols: | SFP28 MSA, CPRI, eCPRI | Warranty: | 3 Years |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.