Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
800G OSFP DR8L PAM4 1310nm 100m DOM Dual MPO-12/APC Optical Module
¥0.00
跳至产品信息
800G OSFP DR8L PAM4 1310nm 100m DOM Dual MPO-12/APC Optical Module
¥0.00
Product Overview
OSFP-DR8L-800G optical module (single mode, 1310nm, 100m, dual MTP/MPO-12, DOM, with heat sink on top)
The OSFP-DR8L-800G OSFP optical module utilizes an MTP/MPO-12 connector and achieves a transmission distance of up to 100m through single-mode fiber. This optical module adheres to the IEEE 802.3ck, IEEE 802.3cu, and OSFP MSA standards. Its built-in digital diagnostic monitoring enables access to real-time operational parameters. It is suitable for 800G Ethernet, 2x 400G DR4, or 8x 100G DR branching applications, data centers, and cloud networks.
Product features
Maximum power consumption: 17W
Parameter testing to ensure excellent performance, quality, and reliability
Supports 2x 400G, 4x 200G, and 8x 100G branching, achieving higher port density
8x 106.25G PAM4 retiming 8x 100GAUI-8 C2M electrical interface
Higher bandwidth suitable for hyperscale data centers and cloud infrastructure
Hot-swappable OSFP MSA, compliant with IEEE 802.3ck, Class 1 laser safety, and RoHS standards
Equipped with digital monitoring capabilities, it provides powerful diagnostic abilities
Specifications
| Product model | OSFP-DR8L-800G | Brand | AndXe |
| Packaging form | Dual-port OSFP with cooling fins | Maximum transmission rate | 850Gbps(8×106.25Gbps) |
| Wavelength | 1310nm | Maximum transmission distance | 100m |
| Interface | DualMTP/MPO-12 APC | Cable Type | Single Mode |
| Emitter type | EML | Receiver type | PIN |
| Transmitting power | -2.9-4.0dBm | Minimum receiving power | -5.9dBm |
| Power budget | 3dB | Reception overload | 4dBm |
| Maximum power consumption | 17W | Extinction ratio | >3.5dB |
| Modulation mode (electrical port) | 8x 100G-PAM4 | Modulation mode (optical port) | Dual4x100G-PAM4 |
| Packaging technology | COB (Chip on Board) packaging | Modulation method | PAM4 |
| CDR (Clock Data Recovery) | TX&RX Integrated DSP | Integrated FEC | None |
| Support protocol | OSFP MSA,IEE802.3ck,IEEE 802.3cu | Warranty | 3 years |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.