Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
400G QSFP-DD LR 1310nm 10km MPO optical module
¥0.00
跳至产品信息
400G QSFP-DD LR 1310nm 10km MPO optical module
¥0.00
Product Overview
QDD-4X100G-LR optical module (single mode, 1310nm, 10Km, MTP/MPO-12, DOM)
The QDD-4X100G-LR optical module, equipped with MTP/MPO-12 connectors, can achieve a transmission distance of up to 10km over parallel single-mode fiber. This optical module complies with the IEEE 802.3bs protocol and the 400GAUI-8 standard.
The 400G Ethernet signal is transmitted through four parallel channels, each with one wavelength per channel. It can be used as a 4x100G split to QSFP-LR-100G.
Product features
Connect the new 400G site to the existing 100G site by splitting the line with 4x100G
Equipped with an Inphi DSP chip, it boasts a maximum power consumption of 9W
Self-developed 53G EML laser chip ensures production capacity
Conduct testing in a real-machine environment to ensure excellent performance, quality, and reliability
Compliant with QSFP-DD MSA CMIS Rev5.0, OIF 56G PAM4, and 100G Lambda MSA standards
Supports 4x100G breakout to QSFP-LR-100G
The QSFP-DD port supports backward compatibility with QSFP+, QSFP28, and QSFP56 optical modules
Specifications
| Compatible model name | QDD-4X100G-LR | Brand | 安科士(AndXe) |
| Packaging form | QSFP-DD | Maximum transmission rate | 400Gbps |
| Wavelength | 1310nm | Maximum transmission distance | 10km |
| Interface | MPO-12/APC | Cable type | Single mode |
| Transmitter type | EML | Receiver type | PIN |
| Transmitting power | -1.9-4.8dBm | Minimum receiving power | -8.2dBm |
| Power budget | 6.3dB | Receiving overload | 4.8dBm |
| Maximum power consumption | 9W | Extinction ratio | 3.5dB |
| DDM/DOM | Support | commercial temperature range | 0 to 70℃ (32 to 158℉) |
| Modulation method (electrical port) | 8x50G-PAM4 | Modulation method (optical port) | 4x100G-PAM4 |
| DSP | TX and RX | hostFEC | Support |
| Supported protocols | Compliant with QSFP-DD MSA standard | Warranty | 3 years |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.