Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
400G QSFP-DD FR 1310nm 2Km MPO optical module
¥0.00
跳至产品信息
400G QSFP-DD FR 1310nm 2Km MPO optical module
¥0.00
Product Overview
QDD-4X100G-FR-Si optical module（Multimode, 1310nm, 2Km, MTP/MPO, DOM)
QDD-4X100G-FR-SiThe optical module can achieve a transmission distance of up to 2km over parallel single-mode fiber through MTP/MPO-12 connectors. This optical module complies with the QSFP-DD optical module MSA, IEEE 802.3 protocol, and 400G AUI-8 standard.
The built-in Digital Diagnostic Monitoring (DDM) allows access to real-time operational parameters. This optical module is suitable for 400G Ethernet and data center interconnect applications. It can also be used as a 4x100G breakout to QSFP-FR-100G.
Product Parameters
Equipped with a Broadcom 7nm DSP chip, it boasts a maximum power consumption of 11W
Achieve lower power consumption, reduced cost, and higher density based on silicon photonics technology
Conduct testing in a real-machine environment to ensure excellent performance, quality, and reliability
Compliant with QSFP-DD MSA CMIS 4.0 standard
Supports 4x100G breakout to QSFP-FR-100G
Compliant with IEEE 802.3 high-speed electrical port standard
The QSFP-DD port supports backward compatibility with QSFP+, QSFP28, and QSFP56 optical modules
Specifications
| Product model | QDD-4X100G-FR-Si | Brand | AndXe |
| Package form | QSFP-DD | Maximum transmission rate | 400Gbps |
| Wavelength | 1310nm | Maximum transmission distance | 2km |
| Interface | MPO-12 | Cable Type | single mode |
| Transmitter type | CW DFB | Receiver type | PIN |
| Transmitting power | -3.1~4.0dBm | Minimum receiving power | -7.1dBm |
| Power budget | 4dB | Reception overload | 4dBm |
| Maximum power consumption | 11W | Extinction ratio | 3.5dB |
| DDM/DOM (Digital Diagnostics) | supports | a commercial-grade temperature range of | 0至70℃(32至158°F) |
| Modulation mode (electrical port) | 8x50G-PAM4 | Modulation mode (optical port) | 4x100G-PAM4 |
| DSP | TX and RX | built-in FEC | supports |
| Fiber core size | 9um/125um | Packaging technology | CW Laser TO-CAN |
| Support protocol | IEEE Std 802.3，QSFP-DD MSA，CMIS 4.0 | Warranty | 3 years |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.