Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
400G OSFP LR4 2km MPO PAM4 1310nm 10km DOM Duplex LC/UPC Optical Module
¥0.00
跳至产品信息
400G OSFP LR4 2km MPO PAM4 1310nm 10km DOM Duplex LC/UPC Optical Module
¥0.00
Product Overview
OSFP-LR4-400G optical module (single-mode fiber, 1271nm, 1291nm, 1311nm, and 1331nm, 10km, duplex LC/UPC, DOM, with heat dissipation fins)
The OSFP-LR4-400G OSFP optical module is specifically designed for 400GBASE Ethernet, capable of transmitting over a distance of up to 10km over OS2 single-mode fiber (SMF) through a duplex LC/UPC interface. This module adheres to the OSFP MSA, IEEE 802.3bs-400GAUI-8, IEEE 802.3cu, and CMIS4.0 standards. Equipped with a built-in Digital Diagnostic Monitoring (DDM), it allows for real-time monitoring of operational parameters.
The single-port OSFP optical module with cooling fins is designed for Ethernet air-cooled switches. It boasts low latency, low power consumption, and high reliability, supporting upstream connections in the spine-and-leaf architecture, such as from 400G switches to 400G switches and from 800G switches to 400G switches. It serves as an ideal solution for HPC computing, AI, and cloud data centers.
Product features
Equipped with a Marvell DSP chip, it boasts a maximum power consumption of 10W
Using Sumitomo LD chips, it boasts high-end performance and excellent reliability
Real-machine testing to ensure superior performance, quality, and reliability
High-speed electrical interface, compliant with IEEE 802.3bs-400G GAUI-8 and OIF 56G PAM4 standards
Compliant with OSFP MSA and CMIS 4.0 standards
8x50G PAM4 retiming 400G AUI-8 electrical interface
It can interwork with other 400GBASE interfaces compliant with IEEE standards (if applicable)
Equipped with digital monitoring capabilities, it provides powerful diagnostic abilities
Class 1 laser safety
Specifications
| Compatible Model Name | OSFP-400G-LR4 | Brand | AndXe |
| Package Type | OSFP (with heat sink fins) | Maximum Transmission Rate | 400Gbps |
| Wavelength | 1271nm,1291nm,1311nm,1331nm | Maximum Transmission Distance | 10km |
| Interface | Duplex LC/UPC | Cable Type | Single-mode |
| Transmitter Type | Coarse Wavelength Division Multiplexing (CWDM) EML | Receiver Type | PIN |
| Transmitting Power | -1.9-4.8dBm | Minimum Receiving Power | -9.1dBm |
| Power Budget | 7.2dB | Receiving Overload | 5.6dBm |
| Maximum Power Consumption | 10W | Extinction Ratio | 3.5dB |
| DDM/DOM (Digital Diagnostics) | Supports | commercial temperature range | 0-70°C (32-158°F) |
| Modulation Method (Electrical Port) | 8x50G-PAM4 | Modulation Method (Optical Port) | 4x100G-PAM4 |
| CDR (Clock Data Recovery) | TX & RX Built-in DSP | Built-in FEC | not support |
| Bit Error Rate (BER) | <1E-12 | Mean Time Between Failures (MTBF) | 6955554.01小时 |
| Packaging Technology | COB (Chip-level Packaging) | Application Type | 400G Ethernet |
| Supported Protocols | OSFP MSA,IEEE 802.3 bs-400GAUI-8,IEEE 802.3 cu, CMIS4.0 |
warranty | 3-year |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.