Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
200G QSFP56 LR4 1310nm 10km DOM Duplex LC Optical Module
¥0.00
跳至产品信息
200G QSFP56 LR4 1310nm 10km DOM Duplex LC Optical Module
¥0.00
Product Overview
QSFP-LR4-200G optical module (single mode, 1310nm, 10km, LC, DOM)
The QSFP-LR4-200G QSFP56 optical module, through the LC duplex interface, can achieve a transmission distance of up to 10km over single-mode fiber.
This module complies with SFF-8661 and IEEE 802.3bs standards. It features built-in Digital Diagnostic Monitoring (DDM) capabilities, allowing real-time access to operational parameters. With these features, this easy-to-install, hot-swappable optical module is highly suitable for 200G Ethernet, data centers, and 5G backhaul.
Product features
Equipped with an Inphi chip, it boasts a maximum power consumption of 8W
By testing in the target switch, we have ensured its excellent performance, quality, and reliability
Compliant with the hot-swappable QSFP56 packaging format
The high-speed electrical interface of this optical module complies with the IEEE 802.3bs standard
Compliant with QSFP56 MSA CMIS V4.0 specification
Supports 4x50G PAM4 re-timing 200G AUI-4 electrical interface
Equipped with digital optical monitoring capabilities, it provides powerful diagnostic abilities
Complies with Class 1 FDA laser safety standards
Specifications
| Compatible model name | QSFP-LR4-200G | brand | AndXe |
| encapsulation | QSFP56 | Maximum transmission rate | 200Gbps |
| wavelength | 1310nm | Maximum transmission distance | 10km |
| interface | DuplexLC/UPC | fiber type | single mode |
| Transmitter type | DFB | Receiver type | PIN |
| transmit power | -3.4-5.3dBm | Minimum received power | -9.7dBm |
| Power budget | 6.3dBm | Received overload | 5.1dBm |
| Maximum Power Consumption | 8W | extinction ratio | >3.5dB |
| DDM/DOM (Digital Diagnostic Monitoring) | support | Commercial temperature range | 0-70℃(32-158°F |
| Modulation (electrical port) | 4x50G-PAM4 | Modulation (optical port) | 4x50G-PAM4 |
| Built-in FEC | No | Technical Agreement | IEEE 802.3bs,QSFP56 MSA,SFF-8661 |
| Warranty 3 years | |||
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.