Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
1x2 magneto-optical switch
¥0.00
跳至产品信息
1x2 magneto-optical switch
¥0.00
Product Features
● No moving components
● Fast switching speed
● Extremely stable latching mode
● Low power consumption
● Excellent stability and reliability
Applications
● Passive optical networks
● Optical protection systems
● Measurement systems
● Network monitoring
Technical parameters
| parameter | unit | 1x2 magneto-optical switch | unit | ||
| unidirectional | Two-way | ||||
| Wavelength Range | nm | 1525~1565 | Other bands optional | ||
| Insertion Loss | dB | 0.7 (Typ.); 1.1 (Max.) | 1.0 (Typ.); 1.3 (Max.) | ||
| PDL (Polarization Dependent Loss) | dB | 0.1 (Typ.); 0.2 (Max.) | 0.1 (Typ.); 0.3 (Max.) | ||
| Return Loss | dB | 40 | 30 | ||
| Crosstalk | dB | 40 | 30 | ||
| PMD (Polarization Mode Dispersion) | ps | 0.2 | |||
| Repeatability | dB | +/- 0.01 | |||
| Durability (Lifespan) | cycles | > 100 Billions | |||
| Switching Speed | μs | Regular (200~400); Ultra-fast (10~30) | Other speed optional | ||
| Storage Temperature | P0PC | -40~85 | |||
| Operating Temperature | P0PC | -5~70 | |||
| Maximum Optical Power | mW | 500 | High power optional | ||
| Dimension (L × W × H) | mm | 28×7.8 × 9.5 | |||
Driver pin definition
unidirectional
| Pin1 | Pin2 | The Optical Output Port |
| 1 (Voltage = VCC) | 0 (Voltage = GND) | IN→OUT1 OUT2→IN |
| 0 (Voltage = GND) | 1 (Voltage = VCC) | IN→OUT2 OUT1→IN |
Two-way
| Pin1 | Pin2 | The Optical Output Port |
| 1 (Voltage = VCC) | 0 (Voltage = GND) | IN ↔OUT1 |
| 0 (Voltage = GND) | 1 (Voltage = VCC) | IN ↔OUT2 |
Electronic control parameters
| Parameters | Specifications | Unit | |
| Regular | Ultra-fast | ||
| Switching Speed | 200~400 | 10~30 | μs |
| Switching Voltage (VCC) | 5 (+/-5%) | 6.0~7.0 | V |
| Switching Current | < 100 | < 350 | mA |
| Driving Mode | Voltage or Pulse Driving | Pulse Driving | NA |
| Pulse Width (typical) | 1000 | 20 | μs |
| Claim Frequency | <800 | < 3000 | Hz |
Notes:
- Puaoao provides optional switch driving board at additional charge;
- It is recommended to use Puoao's switch driving board for the Ultra-fast switch;
- To avoid damaging the Ultra-fast switch, Puoao recommends to set the current limit below 800mA when the power supply voltage is set at 6.0V~7.0V.
AndXe Networks
Corporate Email: susie@andxe.com
Corporate Mobile: 182 8033 7727
This product only displays some parameters. Please contact us if needed.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.