Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
1×8S optical switch
¥0.00
跳至产品信息
1×8S optical switch
¥0.00
Product Features
● Low insertion loss
● Wide wavelength range
● Low crosstalk
● Compact structure
● Fast switching speed
Applications
● Passive Optical Networks
● Optical Protection Systems
● Measurement Systems
● Network Monitoring
Technical parameters
| parameter | unit | 1×8S optical switch |
| Operating wavelength | nm | 1260~1620 for SM, 850 for MM |
| Insertion loss (CL) | dB | ≤1.2 (typical value: 0.9) |
| Wavelength-dependent loss (WDI) | dB | ≤0.25 |
| Temperature-dependent losses (TDL) | dB | ≤0.2 |
| Polarization-dependent loss (PDL) | dB | ≤0.05 |
| Return loss (RL) | dB | SM≥50, MM≥30 |
| Crosstalk (CT) | dB | SM≥55, MM≥35 |
| Repeatability | dB | ≤±0.02 |
| Switching speed | ms | ≤8 |
| Switching times | times | ≥10 million |
| Operating voltage | V | 3.0 or 5.0 |
| Light power handling | mw | ≤500 |
| Operating temperature | ℃ | -5~+70 |
| Storage temperature | ℃ | -40~+85 |
| Operating humidity | ℃ | 5~95 |
| Package size | mm | L75xW66xH12 |
|
Notes: 1. All parameters were tested at room temperature. 2. All parameters do not include connector insertion loss; a pair of connectors adds 0.3dB of loss. |
||
Driver pin definition
| type | state | Optical Path | Electric drive | ||||||||
| 1×8 | Pin 1 | Pin 2 | Pin 3 | Pin 4 | Pin 5 | Pin 6 | Pin 7 | Pin 8 | Pin9 | ||
| Non-locking | A | COM-Port 1 | GND | V+ | – | – | – | – | – | – | – |
| B | COM-Port 2 | GND | – | V+ | – | – | – | – | – | – | |
| C | COM-Port 3 | GND | – | – | V+ | – | – | – | – | – | |
| D | COM-Port 4 | GND | – | – | – | V+ | – | – | – | – | |
| E | COM-Port 5 | GND | – | – | – | – | V+ | – | – | – | |
| F | COM-Port 6 | GND | – | – | – | – | – | V+ | – | – | |
| G | COM-Port 7 | GND | – | – | – | – | – | – | V+ | – | |
| H | COM-Port 8 | – | – | – | – | – | – | – | – | – | |
Electronic control parameters
| type | Voltage | Current | resistance |
| 5V non-locking | 4.5~5.5V | 26~32mA | 175Ω2 |
| 3V non-locking | 2.7~3.3V | 39~47mA | 70Ω |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.