1×4 magneto-optical switch

¥0.00

1×4 magneto-optical switch

Name: 1×4 magneto-optical switch
Brand: AndXe official international website
Availability: InStock

¥0.00

Product Features
● Low insertion loss
● Compact design
● Microsecond-level switching speed
● Ultra-low power consumption

Applications
● Passive Optical Networks
● Optical Protection Systems
● Measurement Systems
● Network Monitoring

Technical parameters

Item	Unit	Parameters		Notes
Item	Unit	unidirectional	Two-way	Notes
wavelength range	nm	1525 ~ 1565
Insertion loss	dB	1.2 (Typ.); 1.7 (Max.)	1.4 (Typ.); 2.0 (Max.)
Polarization-dependent loss	dB	0.15 (Typ.); 0.25 (Max.)
Loss	dB	≥40 (Typ. 50)	≥35 (Typ. 50)
Crosstalk	dB	≥40 (Typ. 50)	≥35 (Typ. 50)
Polarization mode dispersion	ps	0.2
Repeatability	dB	+/- 0.01
Persistence	cycles	Regular ( >100Billions) ; Ultra-fast ( >1000Billions)
Switching speed	μs	Regular (50~200); Ultra-fast (5~10)
Operating temperature	°C	-5 ~ 70
Storage temperature	°C	-40 ~ 85
Optical power	mW	500
Dimensions (L × W × H)	mm	44×21×7.5

Electronic control parameters

Parameters	Specifications		Unit
Parameters	Regular	Ultra-fast	Unit
Switching Speed	50~200	5~10	μs
Switching Voltage (VCC)	2.5 (+/-5%)	5.5~6.5	V
Switching Current	< 100	< 350	mA
Driving Mode	Voltage or Pulse Driving	Pulse Driving	NA
Pulse Width (typical)	300 (Typ.); 500 (Max.)	10	μs
Claim Frequency	<2000	< 3000	Hz

Driver pin definition
unidirectional

Pin No.	Pin1	Pin2	Pin3	Pin4	Pin5	Pin6	Pin7	Pin8
IN~OUT1	+	—	+	—	—	+	+	—
IN~OUT2	—	+	—	+	—	+	+	—
IN~OUT3	+	—	—	+	+	—	—	+
IN~OUT4	—	+	+	—	+	—	—	+

Two-way

Pin No.	Pin1	Pin2	Pin3	Pin4	Pin5	Pin6	Pin7	Pin8
IN~OUT1	+	—	+	—	—	+	+	—
IN~OUT2	—	+	—	+	—	+	+	—
IN~OUT3	+	—	—	+	+	—	—	+
IN~OUT4	—	+	+	—	+	—	—	+

Power and wavelength testing

Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.