Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
10G XFP 1310nm 10km LC 10G single-mode optical module
¥0.00
跳至产品信息
10G XFP 1310nm 10km LC 10G single-mode optical module
¥0.00
Product Overview
The XFP-10G-LR compatible XFP transceiver, via an LC connector, provides a transmission distance of up to 10km over single-mode fiber at a wavelength of 1310nm. The multi-rate XFP supports 10GBASE-LR and 10GBASE-LW Ethernet applications as well as OC-192/STM-64 Short Reach (SR-1) POS applications. This transceiver complies with the current XFP Multi-Source Agreement (MSA) specifications and adheres to the IEEE802.3ae 10 Gigabit Ethernet 10GBASE-LR/LW standard and the 10G Fibre Channel 1200-SM-LL-L standard. It supports Digital Optical Monitoring (DOM), allowing real-time access to operational parameters. It is suitable for data centers, enterprise wiring closets, and service provider transmission applications.
Product Parameters
Model: XFP-10G-LR
Transmission rate: 10Gbps
Transmission distance: 10km
Transmission wavelength: 1310nm
Fiber type: single mode
Interface type: Dual LC
Operating temperature: 0-70℃
Product features
·Built-in Semetch chip, with a maximum power consumption of 1.5W
·By testing in the target switch, its excellent performance, quality, and reliability have been ensured
·Compliant with the hot-swappable XFP MSA standard
·Equipped with digital optical monitoring capabilities, providing powerful diagnostic abilities
·Achieve optical interoperability with 10GBASE XENPAK, X2, and XFP interfaces on the same link
·Belongs to Class 1 FDA laser safety level and ROHS standard
·Complies with IEEE802.3ae standard
Our Advantages
With excellent skills and rich experience
Independent research and development, craftsmanship and intelligence, customizable needs
Imported chips, high-quality solutions, stable performance
Fully compatible, with senior talents to solve technical issues
DDM Digital Diagnosis Real-time Monitoring Module Status
Special test: All performance metrics measured meet the required standards
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.