Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
800G QSFP-DD DR8 PAM4 1310nm 500m DOM MPO-16/APC Optical Module
¥0.00
跳至产品信息
800G QSFP-DD DR8 PAM4 1310nm 500m DOM MPO-16/APC Optical Module
¥0.00
Product Overview
QDD-DR8-800G Optical Module (Single-mode Fiber, 1310nm, 500m, MTP/MPO-16 APC, DOM)
The QDD-DR8-800G QSFP-DD optical module is specifically designed for 800GBASE Ethernet, capable of transmitting over a distance of up to 500 meters over OS2 single-mode fiber (SMF) using a 1310nm wavelength and MTP/MPO-16 APC connectors. This optical module adheres to the IEEE P802.3ck, IEEE 802.3cu, and QSFP-DD MSA standards. It incorporates a built-in Digital Diagnostic Monitoring (DDM) feature, allowing real-time access to operational parameters.
Supports 2x 400G DR4 and 8x 100G DR branching applications, and can also be configured in 400G mode. Features low latency, low power consumption, and high reliability, suitable for 800G Ethernet, data centers, high-performance computing networks, enterprise core and distribution layers, and service provider applications.
Product features
Equipped with a Broadcom 7nm DSP chip, it boasts a maximum power consumption of 16.5W
Supports 2x 400G or 8x 100G breakout, achieving higher port density
Connect the new 800G site to the existing 400G site via a 2x400G branch cable
8×106.25G PAM4 re-timing 8x100GAUI-1 C2M electrical interface
High-speed connection complies with IEEE P802.3ck and IEEE 802.3cu standards
Compliant with hot-plug QSFP-DD MSA standard
Independently developed 53G EML laser chip to ensure production capacity
Parameter testing ensures excellent performance, quality, and reliability
Specifications
| Product model | QDD-DR8-800G | Brand | AndXe |
| Package form | QSFP-DD | Maximum transmission rate | 850Gbps(8×106.25Gbps) |
| Wavelength | 1310nm | Maximum transmission distance | 500m |
| Interface | MTP/MPO-16APC | Cable Type | Single Mode |
| Emitter type | EML | Receiver type | PIN |
| Transmitting power | -2.9-4.0dBm | Minimum receiving power | -5.9dBm |
| Power budget | 3dB | Reception overload | 4.0dBm |
| Maximum power consumption | 16.5W | Extinction ratio | >3.5dB |
| DDM/DOM (Digital Diagnostics) | supports | a commercial-grade temperature range of | 0-70℃(32-158°F) |
| Modulation method (electrical port) | 8×106.25Gb/s PAM4 | Modulation method (optical port) | 8×106.25Gb/s PAM4 |
| CDR (Clock Data Recovery) | TX and RX Integrated DSP | Packaging Technology | COB (Chip-Scale Package) |
| Support protocol | QSFP-DD MSA HW Rev 6.01,CMIS 5.0,IEEE 802.3cu, IEEE P802.3ck |
Warranty | 3 years |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.