Power and wavelength testing
Test the signal transmission strength and wavelength, ensure the signal decoding capability of the receiver, and maintain consistency in wavelength from the transmitter to the receiver.
800G OSFP DR8 PAM4 1310nm 500m DOM dual MPO-12/APC optical module
¥0.00
跳至产品信息
800G OSFP DR8 PAM4 1310nm 500m DOM dual MPO-12/APC optical module
¥0.00
Product Overview
OSFP-DR8-800G optical module (single-mode fiber, 1310nm, 500 meters, dual MTP/MPO-12 APC, DOM, with cover and cooling fins)
The OSFP-DR8-800G OSFP optical module is specifically designed for 800GBASE Ethernet. It achieves a transmission distance of up to 500 meters over OS2 single-mode fiber (SMF) through a 1310nm wavelength and dual MTP/MPO-12 APC connectors. This module adheres to the IEEE 802.3ck, IEEE 802.3cu, and OSFP MSA standards. Equipped with a built-in Digital Diagnostic Monitoring (DDM), it provides real-time access to operational parameters.
The dual-port OSFP optical module with cover and cooling fins is designed for Ethernet air-cooled switches. It boasts low latency, low power consumption, and high reliability, enabling interconnection between upstream switches in the Spine-Leaf architecture, and downstream interconnection between rack-top switches and Ethernet network cards, or with BlueField-3 DPUs in computing servers and storage subsystems. It serves as an ideal solution for HPC computing, AI, and cloud data centers.
Product features
Connect the new 800G site to the existing 400G site via a 2x400G branch cable
Equipped with a Broadcom 7nm DSP chip, it boasts a maximum power consumption of 16.5W
Supports 2x 400G, 4x 200G, or 8x 100G breakout, achieving higher port density
8×106.25G PAM4 retiming 800G AUI-8 electrical interface
High-speed connection complies with IEEE 802.3ck and IEEE 802.3cu-2021 standards
Parameter testing ensures excellent performance, quality, and reliability
Compliant with hot-swap OSFP MSA standard
Independently developed 53G EML laser chip to ensure production capacity
Specifications
| Product model | OSFP-DR8-800G | Brand | AndXe |
| Package form | Dual-port OSFP enclosed with cooling fins | Maximum transmission rate | 850Gbps(8×106.25Gbps) |
| Wavelength | 1310nm | Maximum transmission distance | 500m |
| Interface | DualMTP/MPO-12 APC | Cable Type | Single Mode |
| Emitter type | EML | Receiver type | PIN |
| Transmitting power | -2.9-4.0dBm | Minimum receiving power | -5.9dBm |
| Power budget | 3dB | Receive overload | 4dBm |
| Maximum power consumption | 16.5W | Extinction ratio | >3.5dB |
| Modulation mode (electrical port) | 8x100G-PAM4 | Modulation mode (optical port) | dual4x100G-PAM4 |
| Packaging technology | COB (Chip On Board) packaging | Modulation method | PAM4 |
| CDR (Clock Data Recovery) | TX&RX Built-in DSP | Built-in FEC | None |
| Support protocol | OSFP MSA HW Rev 4.1,CMIS Rev 5.0,IEEE 802.3cu- 2021,IEEE P802.3ck D2.2 |
Warranty3 years |
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.