{"product_id":"25g-optical-fiber-network-card","title":"25G optical fiber network card","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003cbr\u003e AX-X710BM2-F2 is a 10-Gigabit Ethernet dual-port optical network interface controller (NIC) featuring two 10G SFP+ interfaces, supporting a transmission bandwidth of 20Gbps. It also supports PCI-EX8 standard slots, ensuring efficient and stable operation of the NIC. Additionally, the NIC supports VLAN, OOS policies, traffic control, and other functions, making it suitable for medium to large-scale local area network applications.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003cbr\u003e· The data center features low cost, low power consumption, and 25GbE performance;\u003cbr\u003e·Port type: 2 25G SFP28 interfaces;\u003cbr\u003e·Supports RDMA (iWRP, RoCEv2);\u003cbr\u003e·Support IPsec offload;\u003cbr\u003e·Supports inter-type data frame with a maximum size of 9728 bytes;\u003cbr\u003eSupports network virtualization technologies such as SR-IOV, VxLAN, GENEVE, and GRE;\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eProduct Name: 25G Dual-port Network Interface Card\u003cbr\u003eProduct model: AX-E810XXVAM2-F2\u003cbr\u003eProcessor chip: Intel E810XXVAM2 25G Ethernet controller\u003cbr\u003eBus type: PCIe 4.0×8\u003cbr\u003ePort type: 2 25G SFP28 interfaces\u003cbr\u003eBarrier height: full-height and half-height configurations\u003cbr\u003eSystem interface type: PCIe 4.0\u003cbr\u003eEthernet storage: SMB Direct\u003cbr\u003ePower consumption: 20.8W\u003cbr\u003eTransmission medium type: Lc fiber, compliant with MMF's 62.5\/50 micron specifications\u003cbr\u003ePower supply: PCIe power supply\u003cbr\u003eTransmission rate: 25Gbps\u003cbr\u003eWarranty period: Three-year warranty, lifetime maintenance\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003cbr\u003eNetwork standard: IEEE802.3\u003cbr\u003eISCSl acceleration: supported\u003cbr\u003eQoS strategy: Support\u003cbr\u003eFCOE offload: supported\u003cbr\u003eRSS\/TX Queue: Supported\u003cbr\u003ePXE support: Yes\u003cbr\u003eInterrupt levels: INTA, MSI, MSI-X\u003cbr\u003eOperating temperature: 0°C to 55°C (32°F to 131°F)\u003cbr\u003eStorage temperature: -40°C to 70°C (-40°F to 158°F)\u003cbr\u003eStorage humidity: 90% non-condensing relative humidity at 35°C\u003cbr\u003eLED indicator: A flashing green light (Act light) indicates that data is passing through\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eInstallation and connection\u003c\/strong\u003e\u003cbr\u003eTo ensure the correct installation of the Ethernet adapter, please follow the steps below\u003cbr\u003e1. Shut down the computer\u003cbr\u003e2. Disconnect the power cable\u003cbr\u003e3. Remove the computer cover and locate the idle PCI-E (X8, X16) bus expansion slot\u003cbr\u003e4. Remove the slot cover plate (if any) by removing the screws or loosening the lever\u003cbr\u003e5. Grab the top edge of the Ethernet adapter and firmly insert it into the card slot\u003cbr\u003e6. Use existing screws or tie bars to re-secure the Ethernet adapter's mounting bracket\u003cbr\u003e7. Close the computer cover, plug in the cable, and turn on the computer\u003cbr\u003e8. Plug in the optical module and fiber cable\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFault handling methods\u003c\/strong\u003e\u003cbr\u003e1. The Link indicator light does not illuminate after the optical module is inserted\u003cbr\u003e★ Is the server turned on?\u003cbr\u003e★ Is the Ethernet adapter properly inserted into the PCI-E bus expansion slot?\u003cbr\u003e★If it still cannot be used normally, it may be due to dirt, sweat stains, or other contaminants on the gold fingers of the card, causing poor contact between the card and the motherboard slot. Cleaning the gold fingers with a rubber eraser usually resolves the issue and allows normal use;\u003cbr\u003e★Whether the optical module is inserted correctly, only when it is inserted correctly will the Link indicator light up;\u003cbr\u003e★ If the issue remains unresolved, please contact the after-sales service department for assistance;\u003cbr\u003e2. The ACT indicator light does not flicker after the fiber cable is connected\u003cbr\u003e★ Check if the TX and RX interfaces of the fiber optic cable are properly connected?\u003cbr\u003e★Check if the optical module is compatible?\u003cbr\u003e★ Check whether the fiber cable matches the optical module (multi-mode or single-mode)?\u003cbr\u003eIf you encounter any issues with the product, please contact our after-sales service department for assistance;\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePrecautions for use\u003c\/strong\u003e\u003cbr\u003e★Pay attention to anti-static protection during product installation.\u003cbr\u003e★ Do not place this product in a damp environment, such as a bathroom\u003cbr\u003e★ Prevent damage from corrosive substances, such as hydrochloric acid, sulfuric acid, caustic soda, oxalic acid, etc\u003cbr\u003e★ Please do not modify, disassemble, or repair without authorization.\u003cbr\u003e★ Do not bake at high temperatures, as the casing and electronic components of the device may be damaged.\u003cbr\u003e★Please do not expose this product to direct sunlight, as the casing and electronic components may be damaged.\u003cbr\u003e★ Prevent impact, as external impacts may damage the product.\u003cbr\u003e★ Operating temperature: -40°C to 70°C; operating humidity: 35% to 90% non-condensing relative humidity.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOur Advantages\u003c\/strong\u003e\u003cbr\u003eWith excellent skills and rich experience\u003cbr\u003eIndependent research and development, craftsmanship and intelligence, customizable to meet diverse needs\u003cbr\u003eImported chips, high-quality solutions, stable performance\u003cbr\u003eFully compatible. Senior talents to solve technical issues\u003cbr\u003eDDM Digital Diagnostics Real-time Monitoring Module Status\u003cbr\u003eSpecial test: All performance items have been tested and meet the required standards\u003c\/p\u003e","brand":"AndXe官方旗舰店","offers":[{"title":"Default Title","offer_id":47856510730465,"sku":null,"price":2218.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/4194\/3009\/files\/25g.png?v=1768459203","url":"https:\/\/osfpqsfp.com\/products\/25g-optical-fiber-network-card","provider":"AndXe official international website","version":"1.0","type":"link"}